Thursday, November 24, 2011
Moved to willgadd.com
I'm putting this blog along with all my various old websites, blogs, etc. together on willgadd.com, come on over and check it out! New post up on a mixed climbing accident/video, interesting.
http://willgadd.com/?p=600
Wednesday, November 02, 2011
The picture above is the last one I could find in my photo collection where I have a leash on a tool--Norway 2005.
This is another blog post inspired by a question from a reader. The question was roughly, "I was wondering your take on leashless climbing for beginners? I am a sorta old school ice climber that still uses leashes for those 4 days a year I manage to get out ice climbing. (father in washington state) I feel that I don't get enough time on ice to get strong enough to enjoy the benefits of leashless climbing.
I have heard many peoples opinion that beginners should start out leashless for several reasons. many guides start clients this way. I feel that the beginners need every advantage they can get to enjoy the day.
What is your take?"
Back in the day I thought leashes for ice tools were the only way to hang onto ice tools, and that gaiters were the only way to keep snow out of my boots. I now seldom to never use either leashes or gaiters. And I don't use Screamers/Force limiters much on ice screws, and I don't carry a third tool either. Amazing how what was once standard equipment is now history.
Leashes: To start with, very, very few people set their leashes up correctly to begin with. Most people grab their ice tool at 90 degrees to the shaft, set the leash length and call it good. But your hand tends to rotate when actually hanging on so the index finger isn't anywhere near 90; usually it points more "up" than parallell to the ground. This rotates the pinky up, putting it several centimetres higher than it should be. If your pinky isn't almost falling off the bottom of your tool the tool when hanging onto the tool it won't rotate correctly when swung. Different thicknesses of gloves will also effect where your hand is on the tool. So if you're going to use leashes at least set them up properly, and use a decent one for technical ice climbing like the Android.
That said, I can't remember the last time I used leashes, and don't think in most situations for most people they are worthwhile. Most people are strong enough rock climbers to hold onto the tools when (and not if, when) their feet blow. I have seen a mitten or glove still hanging through a wrist loop on a lonesome tool after the climber has fallen off; leashes help hold on, but not as much as is commonly assumed, and modern leashless tools are surprisingly easy to hold on to. It probably makes sense for people who don't rock climb at all during the sumer to use leashes; they may not have the hand strength to hang on if their feet blow. And in this situation an Android or equivalent really solid leash has to be used or the benefit is missed. I have sometimes used leashes for alpine climbing with hazard overhead, but more often I get too annoyed and just end up climbing leashless. However, I can see the theory even if I can't practice it.
I won't go into the benefits of leashless, other than to say the only thing a leashed tool still does better than a leashless tool is significant: Leashed tools swing better. I have yet to get a better swing out of a leashless tool than a well set-up leashed tool. The perfectly relaxed fast swing is the holy grail of leashless tools, and so far I haven't felt it, and I try every new tool I can. It's just that the other advantages of leashless tools outweight the disadvantages. Many climbers have only swung leashless tools; I've swung both thousands or maybe millions of times by now, and I have yet to swing a leashless tool that swings as fluidly as a leashed tool.
I was also very concerned about dropping leashless ice tools, but I've dropped more leashed tools than leashless tools over the years. I'm not sure why this is, but it's true for me. Occasionally I'll use the BD Spinner, mostly on alpine terrain. I used to think leashes were a good idea for novices so they didn't drop their tools, but they seem to mostly just leave them in the ice and hang on the rope. If they do fall I'm not sure having a leashed tool spinning around them is a great improvement in novice (close to the ground) environments... It might be better to just go pick it up. BD Spinners aren't rated for the sort of impacts a fall can generate and there are all kinds of skull and crossbones warnings on the packaging, but somehow they do occasionally hold slips. Best not to slip so far you need to rely on a piece of gear that's not at all designed for catching a slip...
So, if you're a much better ice climber than you are a rock climber, and don't have the strength to hang on then your choices are either get stronger, which won't take all that much work, use leashes, or don't ice climb. Two of those solutions are reasonable.
And then there's gaiters. I use these slightly more than leashed tools (I just realized I don't even have a set of tools set up with leashes anymore so that's not saying a lot), but I like pants like the Arcteryx Gamma that have grommet holes and a grippy strip around the cuff. This offers a great seal without turning your boots into sweat baths like gaiters--a great deal of moisture goes out the top of your boots, gaiters just seal that in and soak everything. Most of my winter boots also have built-in gaiters, but these are more for warmth than to shed snow. Still, the combination of the pant with a lace hook/rubber strip/underfoot strap and a boot with a built in gaiter means no snow gets into my boots even when swimming in the deep stuff. If I'm wearing really light, low-cut boots like I'll use for sumer alpine adventures then I'll occasionally break out the lightest, most breathable gaiter I can find. But I don't like 'em, they are an inelegant solution to a problem.
Screamers: A good rope has relatively low impact force (single, I don't use half ropes much except for low-angle alpine scrabbling, their impact forces are often too high to be worthwhile except for gentle falls), so unless the gear is super sketchy I don't use Screamers anymore. I work hard to get good ice gear, and retreat if I can't. The nebulous line between "maybe good enough" and "GOOD" is too fine for me. I want my gear to be good, or I either solo or go home. Bad gear leads to bad decisions for me, others may have more self-restraint. Gear is not meant to be jewelry, it's meant to be solid. Playing games with shitty gear is seldom going to work out better than retreating if the movement isn't well within my skills. I used to believe "Some gear is better than none," but I'm moving more toward, "I like good gear, and will work hard to get it. If I can't get good gear then I go into solo mode, or retreat."
So, what are we going to lose next? Socks? Hammers on our tools? Oh right, we lost those too! The future is definitely less, not more when it comes to gear. In the future leashed tools, gaiters and 60/40 Anoraks will all be found in the same section, and only available in dull earth colours. Or maybe, like tie-die shirts and disco, everything old will be new again one day, we'll see.
Thanks for the question.
Tuesday, October 11, 2011
Ice Season Cometh: Q and A
First off, sorry for the long delay in blogging. I've been stupid busy with everything from getting my first guiding exam done, family, writing, doing a couple of TV shows and of course climbing, mountain biking (broke some ribs, healing now), travel, and just life. Enough excuses, I'm back, thanks for the heckling/encouraging emails.
1) There has be a lot of discussion on knots for tying ropes to rappel. While for that purpose only few people are still using the double fishermans (I use an EDK backed up with a second EDK), it seems to be the knot of choice for tying abalakow slings. Why? Couldn’t I use a doubled EDK here as well? That would seem much easier to tie with gloves on.
2) Now this might sound stupid: While I would never think this could work, I have read a few accounts of long, repeated abseils where it sounded as if the climbing rope itself had been fed directly through the V-thread, saving cord. Did I get that wrong? Can that work? I would assume under load the rope would freeze in place for sure. Maybe something was lost in translation…
-Greetings to the Rockies from Hamburg, Germany.
A #1: The EDK (simple overhand knot) is used for a couple of different reasons: It's relatively easy to untie, it's relatively low-profile on the pull so it's less likely to get hang up, and it's very simple. It does require relatively long tails in case it rolls; if a second EDK is used then that requires yet more rope. An EDK may not be the best choice for ropes of different diameters; I have never seen or heard of a problem with an EDK in the fieldand different diameter ropes, but there's likely a reason some people won't use the EDK with different diameter ropes. Even when weighted you can usually work an EDK out. Sounds like a pretty good knot for rappels with the same ropes.
A fisherman's in contrast, is hard to untie and takes relatively little additional cord for long tails. That sounds like a pretty good knot for a v-thread/Abalokov for me. A simple overhand/EDK might work OK for a V-thread, but would require more cord for tails, and more monitoring. There was fatality here a few years ago where the climbers came down, clipped into the thread, pulled their rope, and the thread "broke." What actually happened is that they had clipped into the long tails on the thread, which had re-frozen into the ice. Sad as hell. Always make sure you're clipped into the true thread and not the tails. Why use a knot that requires long tails for threads? I like to be able to rotate the thread to check the cord all the way around. And I always back threads up with a screw, or two if I don't know the solidity of the thread.
Here's where it starts to get rather pedantic, but there are more reasons I like the EDK (just one with relatively long tails for me in general, but two is a standard in some circles) for raps and a fisherman's for threads. A rappel is a relatively low-load scenario where only the climber's weight is on the rope really, and only half the climber's weight on any one strand (assuming the rope isn't a pullley through the v-thread, which would be bad as it would cut the material through the thread!). So a simple overhand is really, really unlikely to flip under the low load. But a V-thread may have a lot of weight on it due to two or more climbers clipping into it, and the likely scenario of a climber clipped a sling into the thread above it and then slamming down below the thread if they blow undoing their belay device or something... I'd want something really strong that wouldn't roll for my thread material, full stop. If I were using webbing I'd tie a water knot, cord I like a Fisherman's.
You could use a lot of different knots for a thread, and for a rappel pull, and you'd likely live, but I like a fishermans for V-thread cord, and a water knot for webbing, and an EDK for rappels. Do use at least 7mm cord for threads.
#2: Yes, and I've done it lots. BUT, if the rope re-freezes even a tiny bit in the hole, or there's a lot of rope drag from, say, twists, you can rapidly have a bad experience with a stuck rope. If you want to rap using a rope fed through the thread you'll be feeding the "fat" rope through the hole; if you climb on two 8mm ropes or a single 9.1 then no problem, but if you're rapping off with ropes of different diameters then you need, as normal, to pull "skinny," which means the fat rope goes through the hole. If the rope is a hairy beast of rope or frozen up at all then the sharp bend in the back of the thread, or if you didn't get the thread perfect (and I normally am off by 20 percent or so) then there's a natural "pinch point" in the back of the thread. I actually leave 7mm cord or one-inch webbing with old 'biners or quicklinks on the cord if getting the rope stuck would be any problem at all, and definitely don't feed it through. It's one of those ideas that works really well occasionally, but in general opens up a mess of problems.
So there is a really long answer to two short questions! And there are levels to all of this; for me recreationally I'm totally fine with one loop of good-quality 7mm cord for the thread, but that' far from "full strength."
Few solutions or concepts in climbing are absolute. I've been playing this game for more than 30 years, and each year I revise, tune, toss out and otherwise change my systems in light of new ideas or data. This summer I took the first guiding course and exam here in Canada; I learned a lot, but the most important thing I learned was a different way of looking at climbing.The big thing is to have an understanding of what you're dealing with, or reduce the situation to parts that do make sense and will do the job at hand.
Finally, Mark Beverly has done a lot of good research, here is some he did on horizontal vs. vertical V-threads, as well as the differences materials make in the strength of threads. Fatter material is better. I'm not yet sold on the benefits of vertical vs. horizontal V-thread placements, but will play more with them this winter.
And there is ice in the Canadian Rockies, saw it today. Go get it!
Thursday, September 01, 2011
Quick Review Notes on the Spot 2 and Spot Connect
Summary: If you're pondering buying a Spot for tracking and emegencies I'd suggest NOT getting the Spot Connect. To do anything but send an SOS message doesn't work without a bluetooth phone, and the bluetooth pairing is sketchy even sitting at your desk at home. A spot 2 is better if you're actually outside of civilization, which is where I generally use a Spot. Bad product design. Spot needs a Spot Connect with Spot 2 physical buttons/menus.
Thursday, August 25, 2011
Reflections
Sunday, August 07, 2011
Invermere to Canmore
The trip would not have been possible without a few key people, including Dough Nitchie in Vernon (thanks for the socks, weather and stoke), Becky Bristow in Revelstoke (it's good to have friends who will come and get you when you call up on the satellite phone and say, "Help!"), Al Polster and Lisa in Revelstoke (they got me back in the game when I was beaten down, and up the hill), and Frank Kernick and Tracye in Invermere, who again kept the psyche up through a combination of water skiing, a soft bed, and a great attitude. And of course my mom, who I had to call from a cut block to figure out how to get out on her computer's Google Earth...
Friday, August 05, 2011
Invermere from near Revelstoke via the Bugaboos
Wednesday, August 03, 2011
Aerial hero to cut block zero?
Not all cut blocks are launchable. In fact most are barely landable!! Logging roads grow over to the point where they are worse than the bush, even if they show on the gps. BC bush is really fierce. There's a fine line between vol bivouac and vol bushwhack, and I got well on the vegetation side of it.... I landed high in Plant creek about as deep as you can get in the Monashees, thought I had an ok cut block (logged area) that would be good to launch out of but wound up hanging 6 feet off the ground. Solved that, good thing i had a wrench for links on lines and can climb ok, nice night with morning bear, could not escape my block for hours in the morning. Priorities went from launching to finding a place to launch to just getting out of the valley I was in, epic bush. Totally impossible to move through that logged bush at more than a few hundred meters an hour. Finally called my mom on sat phone (you know it's bad when u call mom) who found a way out on google earth. Hiked about 10k of bush nasty grown over skidded trail and another 20 of road, got ride (thanks Becky!) to Revy. Happy to be here, developing new plan and solving tech issues with Spot etc
A huge thanks to Doug N. for the help in Vernon!
Sunday, July 31, 2011
Aerial Exploring: Vernon East
Friday, July 15, 2011
Sport Climbing season done, paragliding, MORE is not safer
Wednesday, July 13, 2011
Magnetron Carabiners
Magnetron Technology: The reinvention of the auto-locking carabiner, coming July 2012 from Black Diamond Equipment on Vimeo.
Monday, July 11, 2011
Paragliding World Championships Musings
Thursday, June 23, 2011
Sponsorship and "Extreme!" Sports
Friday, June 10, 2011
A few things...
Right, it's finally spring here in Canmore! I'm almost afraid to say it too loudly, but I think it's really happening. I was actually too warm rock climbing yesterday, a season first. I even whined about it a bit just to make sure the sensation of warmth was real and not just a dream. Now all the snow around here has to melt--normally the valleys and even lower passes are good to go by this time of year for running and riding, but lots of snow out there still, as I just saw on a drive into the mountains. I was up helping out a bit with the Tour Divide, which is a race from Banff, Alberta to Mexico. My cousin is racing in it, go Dylan, knew a few other uber-lungs lined up at the start. I saw the leaders go by after about three hours, they were going faster than I normally ride when I'm out for an hour or two. Pretty cool to see.